Written by When you have an easy to install ceiling fan can make a big difference in the climate of your home, both winter and summer. Your first step in installing a new ceiling fan is deciding where you want the fan located. The usual place to install one is in the middle of the room where he usually replaces a central light. The center of the room provide a smooth air flow with the rest of the room.
A fan uses about the same power as a ceiling lamp light, so your electrical circuit should not be overloaded. If the fan has lights, so, you must ensure that the circuit can handle the load. If I sing, you have to run a new circuit with a circuit breaker again. If you do not have a central ceiling light, you will need to create a power contributing to it. You can tap into an existing circuit to do so.
You should then check the floor to ceiling height of the blades. Measure the distance from floor to ceiling and subtraction to the fan that hangs below the ceiling to the underside of the leaf. The recommended minimum height is 7 feet.
If you find that the floor to ceiling distance is too small to see, in a roof assembly for the fan. With specific fan models can increase the height of the fan blade as much as ten inches. You need at least twelve inches between the ceiling and the top of the fan blades to ensure proper air circulation. If you have the space of eighteen inches works best.
Before you begin installing the new ceiling fan, is very important to disconnect the power. You can not start working until power to the circuit breaker or fuse lamp is off. It is only then that you must remove the lamp. Be sure to read all installation instructions and safety tips before you start and electric. This can mean the difference between a smooth and simple installation and an installation consisting of a trip to your local emergency room.
